Line Cleaning 2-GO
Line Cleaning 2-GO system has a 5 quart hand pump reservoir with a 25" line with a sanke duplex cleaning coupler attached at the line. It also includes a faucet brush, faucet wrench, and 4 oz bottle of line cleaner (mix 1/2 oz per quart of water). Simply disengage the sanke, remove the beer line from the sanke, connect the beer line to the cleaning coupler and pump solution (or clean water) back through your line and out the faucet. The 5 quart solution capacity is good for even large set-ups!
There are 2 additional options you can select from below.
If you want to use this pump on both commercial and corny kegs, you will need to add the 1/4'' MFL tailpiece assembly. As long as you use 1/4'' MFL beer disconnects on your corny kegs, this option will work with this pump.
We have a new fitting for ball locks that will allow you to clean your lines with out removing the fittings from the lines. It can't get any easier than that! You will need to add this option for the ball lock fitting. You do not need both options to clean your lines, this option is for convenience of not having to remove your line from the fitting and you will not need option #1 as you will get everything you need with option #2 to clean your lines.
(This fitting will only work with ball lock disconnects)
If pump does not pressurize tank, use a food grade grease on the outside of the plunger o-ring