Want to build a kegerator for home brew? This is the system you want! This Homebrew Pin Lock Kegging System Includes:
Dual Gauge Regulator
New 5# Aluminum CO2 bottle (empty)
- Two Used 5 gallon Pin Lock corny kegs (may have labels)
- 15 feet of Thick Wall Gas Line (see details below)
Two faucets, handles, shanks, beer MFL disconnects and beer line
Gas disconnects with MFL threaded barbs
- Full Set of Instructions (Who reads these anyhow)
The gas line set up assumes you keep the CO2 bottle outside of your kegerator and run the line inside to a "T" connector:
- 6 feet of line to connect the regulator to a "T" connector
- 6 feet of line & gas disconnect for the first keg (long so you can bring
the keg outside of the fridge to shake/force carbonate)
- 3 feet of line and gas disconnect for the second keg
Most people put the faucets through the side wall, and the 4-1/8" shank is long enough for most refrigerators - it will fit as long as the wall thickness doesn't exceed 2-3/8". Assembly is simple, drill two 7/8" holes through the wall above the top of your kegs, slip the shank through and attach the brass nut. Connect the tail piece assembly to the shank, the other end goes to your corny keg. Attach the faucets to the outside of the shank with the included faucet wrench. Hook up the CO2 and you are ready to go!
Keep an extra keg around for line cleaning! Fill with at least 4 gallons of cleaning solution (so you don't use all your CO2) and pump through your lines between kegs. Work the faucet open & closed and run a gallon through, let stand overnight and then flush with water.
We know some homebrewers are more picky than others, so please keep in mind that these are USED kegs. Some of these kegs are probably 30 years old. Do not expect new kegs. If you are looking for new kegs, please check out our new kegs. We try and have quality kegs available at all times. With this said, they are going to show normal wear and tear. We are not implying that our kegs are not quality...we just want to avoid any misunderstandings.
If you are unhappy with your used 5 Gallon Cornelius Kegs for any reason, we will gladly take them back. The purchaser will be responsible for return shipping charges.