High Pressure Cast Iron Burner

4" High Pressure Casting with Orifice Block and Air Shutter.

Perfect for full boils and all-grain brewing.

Please note that previous model came with 2 adjustable screws to adjust airflow.  Newer model does not.  The plate is still adjustable.

Add the brass orifice to connect the burner to your regulator hose if you don't have one.

Propane Troubleshooting:

If you are not getting the best flame possible out of your propane burner, you may have triggered a safety valve in the propane regulator body. This occurs when the gas flow through the regulator is too great. You will need to disconnect the regulator from your propane tank to release the safety valve. While connecting your regulator to your propane tank, it is very important that the propane tank and all needle valves are completely closed. Once the regulator is correctly connected to your closed tank, open the propane tank slowly to allow gas to flow into the regulator. You can now open the needle valve enough to ignite your burner. Once the burner is lit you can slowly open the needle valve until you reach the desired flame intensity.

High Pressure Cast Iron Burner